MUCS-CNFM-600 Mitering Upcut Cir. Saws For Cut. Non-Ferrous Mat. (MUCS-CNFM-600)

The SA-MCS-NFM-600 is a large capacity mitering upcut circular cold saw designed specifically for cutting non-ferrous material. Featuring a 24" (600 mm), 132 tooth carbide blade, it is capable of producing burr free cuts on round material up to 9" in diameter, square material up to 8" and rectangular cuts up to 15' x 6". The SUP 600 NF saw offers an increased cutting capacity not found in traditional pivot down saws.

Standard features include an adjustable feed rate, mitering capabilities with fixed stops at 22.5°, 45°, 135°, and 157.5°, four pneumatic clamps to secure material being cut, and an integrated debris collection. Safety features include dual hand operation and a safety interlock that will prevent the saw from operating with the hood open. Machine can also be coupled with a chip vac.

Upgrade this saw with a measuring system for accurate cuts at specific lengths, reducing waste and increasing production efficiency. 

• Precision miter upcut non-ferrous saw
• Miter capabilities with fixed stops at 22.5 degree, 45 degree, 90 degree, 135 degree & 157.5 degree
• Powered safety hood with safety interlock switch
• Blade door with safety interlock switch
• Dual palm buttons
• Adjustable feed rate on saw head
• Two horizontal pneumatic clamps
• Two vertical pneumatic clamps
• Capable of slotting
• Moveable back fence for larger capacity
• One gallon coolant
• Mist coolant lubrication system
• One 600 mm diameter, 132-tooth carbide blade
• One blade wrench
• Air hose
• Chip collection drawer in base and a 4-3/4" chip collection port
• Adjustable leveling pads
• Meets CE standards
• Warranty: Three years on parts
• Made in Spain